Cisco 300-075 ExamCIPTV2 Implementing Cisco IP Telephony and Video, Part 2

Total Question: 420 Last Updated: May 01,2018
  • Updated 300-075 Dumps
  • Based on Real 300-075 Exams Scenarios
  • Free 300-075 pdf Demo Available
  • Check out our 300-075 Dumps in a new PDF format
  • Instant 300-075 download
  • Guarantee 300-075 success in first attempt
Package Select:

Questions & Answers PDF

Practice Test Software

Practice Test + PDF 30% Discount

Price: $65.95 $29.99

Buy Now Free Trial

Quick Guide: cisco 300 075

Exambible 300 075 pdf Questions are updated and all 300 075 dump answers are verified by experts. Once you have completely prepared with our 300 075 dump exam prep kits you will be ready for the real 300 075 dump exam without a problem. We have Replace Cisco 300 075 ciptv2 dumps study guide. PASSED 300 075 dump First attempt! Here What I Did.

Q91. Cisco Unified Communications Manager is configured with CAC for a maximum of 10 voice calls. 

Which action routes the 11th call through the PSTN? 

A. Configure an SIP trunk to the ISR. 

B. Configure Cisco Unified Communications Manager AAR. 

C. Configure Cisco Unified Communications Manager RSVP-enabled locations. 

D. Configure Cisco Unified Communications Manager locations. 

Answer:


Q92. Which minimum configuration is needed for the SAF Internal Client to register with this SAF Forwarder? 

A. router eigrp SAF!service-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit-service-family!voice service safprofile trunk-route 1session protocol sip interface Loopbackl transport tcp port 5060i 

B. router eigrp SAF!service-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit-service-family!voice service safprofile trunk-route 1session protocol sip interface Loopbackl transport tcp port 5060!profile dn-block 1 alias-prefix 1972555pattern 1 type extension 4xxx!profile callcontrol 1dn-servicetrunk-route 1dn-block 1dn-block 2i 

C. router eigrp SAF!service-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit-service-family!voice service safprofile trunk-route 1session protocol sip interface Loopbackl transport tcp port 5060!profile dn-block 1 alias-prefix 1972555pattern 1 type extension 4xxx!profile callcontrol 1dn-servicetrunk-route 1dn-block 1dn-block 2!channel 1 vrouter SAF asystem 1subscribe callcontrol wildcardedpublish callcontrol 1i 

D. router eigrp SAF!service-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit-service-family!voice service saf!channel 1 vrouter SAF asystem 1 

E. router eigrp SAF!service-family ipv4 autonomous-system 1!topology base exit-sf-topologyexit-service-family i 

Answer:


Q93. Which statement about H.323 Gatekeeper Call Admission Control is true? 

A. Gatekeeper Call Admission Control applies to centralized Cisco Unified Communications deployments that use locations based Call Admission Control. 

B. Gatekeeper Call Admission Control applies to distributed Cisco Unified Communications deployments. 

C. Gatekeeper Call Admission Control applies only to distributed Cisco Unified Communications Express deployments. 

D. Gatekeeper Call Admission Control setting is configured in Cisco Unified Communications Manager. 

Answer:

Explanation: 

Incorrect Answer: A, C, D in distributed call processing deployments on a simple hub-and-spoke topology, you can implement call admission control with a Cisco IOS gatekeeper. In this design, the call processing agent (which could be a Unified CM cluster, Cisco Unified Communications Manager Express (Unified CME), or an H.323 gateway) registers with the Cisco IOS gatekeeper and queries it each time the agent wants to place an IP WAN call. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/cac.html#wp1044743 


Q94. How is a SIP trunk in Cisco Unified Communications Manager configured for SIP precondition? 

A. The configuration is done by selecting a SIP precondition trunk for trunk type. 

B. The configuration is automatically selected when RSVP is enabled for the location assigned to the trunk. 

C. SIP precondition is configured by selecting E2E for RSVP over SIP on the default SIP profile assigned to the SIP trunk. 

D. SIP precondition is configured by configuring a new SIP profile and selecting E2E for RSVP over SIP. The new SIP profile must then be assigned to the SIP trunk. 

Answer:


Q95. When device mobility mode is enabled or disabled for a cluster, to which does the cluster setting apply? 

A. all phones in the cluster that support device mobility 

B. all phones in the cluster that subscribed to device mobility 

C. mobile phones in the cluster that support device mobility 

D. mobile phones in the cluster that are in default mode 

Answer:


Q96. Which statement is correct about AAR? 

A. The end users see, "Network Congestion Rerouting?" but AAR is otherwise transparent to the end user and works without user intervention. 

B. AAR will display "not enough bandwidth" on the IP phone while it reroutes the call. 

C. AAR allows calls to be rerouted because of insufficient Cisco Unified Border Element controlled bandwidth to an ITSP. 

D. AAR allows calls to be rerouted due to insufficient gatekeeper controlled IP WAN bandwidth. 

Answer:

Explanation: 

Incorrect Answer: B, C, D Automated alternate routing (AAR) provides a mechanism to reroute calls through the PSTN or other network by using an alternate number when Cisco Unified Communications Manager blocks a call due to insufficient location bandwidth. With automated alternate routing, the caller does not need to hang up and redial the called party. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b03aar.ht ml 


Q97. Which two actions ensure that the call load from Cisco TelePresence Video Communication Server to a Cisco Unified Communications Manager cluster is shared across Unified CM nodes? (Choose two.) 

A. Create a neighbor zone in VCS with the Unified CM nodes listed as location peer addresses. 

B. Create a single traversal client zone in VCS with the Unified CM nodes listed as location peer addresses. 

C. Create one neighbor zone in VCS for each Unified CM node. 

D. Create a VCS DNS zone and configure one DNS SRV record per Unified CM node. 

E. In VCS set Unified Communications mode to Mobile and remote access and configure each Unified CM node. 

Answer: A,D 


Q98. In a distributed call processing network with locations-based CAC, calls are routed to and from intercluster trunks. Which trunk type is implemented in this network? 

A. intercluster trunk with gatekeeper control 

B. intercluster trunk without gatekeeper control 

C. SIP trunk 

D. h225 trunk 

Answer:


Q99. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phones. The Cisco VCS and TMS control the Cisco TelePresence Conductor, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

DNS Servers 

Device Pool 

Expressway 

ILS 

Locations 

MRA 

Speed Dial 

SIP Trunk 

Which three configuration tasks need to be completed on the router to support the registration of Cisco Jabber clients? (Choose three.) 

A. The DNS server has the wrong IP address. 

B. The internal DNS Service (SRV) records need to be updated on the DNS Server. 

C. Flush the DNS Cache on the client. 

D. The DNS AOR records are wrong. 

E. Add the appropriate DNS SRV for the Internet entries on the DNS Server. 

Answer: B,C,E 


Q100. What is the purpose of a SAF Client? 

A. To decode address information and route calls to and from the end points 

B. To pass IP information from the CUCM to the endpoint 

C. To learn about and advertise or subscribe information about SAF network services 

D. To reside in the Cisco IOS software, and to communicate with the SAF forwarder 

Answer:


Related 300-075 Articles